C++ Tutorial...


C++ Tutorial

Ok first of all I would like to say that I DID NOT WRITE THIS However I found it in some OLD backups of disks I've found and thought I would share this. This is a GREAT beginner tutorial and it can also be used as a reference for experts... This is VERY long 20 lessons tutorial, but that one is the best I've seen in the internet that's why you will see the first 2 lessons...:

Lesson 1 - The Basics

This tutorial is designed for everyone: even if you've never programmed before or if you have extensive experience programming in other languages and want to expand into C++! It is for everyone who wants the feeling of accomplishment from a working program.

Getting set up:
C++ is a programming language of many different dialects, similar to the way that each spoken language has many different dialects. In C++, dialects are not because the speakers live in the North or South. Instead, it is because there are many different compilers that support slightly different features. There are several common compilers: in particular, Borland C++, Microsoft C++, and GNU C++. There are also many front-end environments for the different compilers--the most common is Dev-C++ around GNU's G++ compiler. Some, such as G++, are free, while others are not. Please see the compiler listing for more information on how to get a compiler and set it up.

Each of these compilers is slightly different. Each one should support the ANSI/ISO standard C++ functions, but each compiler will also have nonstandard functions (these functions are similar to slang spoken in different parts of a country). Sometimes the use of nonstandard functions will cause problems when you attempt to compile source code (the actual C++ written by a programmer and saved as a text file) with a different compiler. These tutorials use ANSI/ISO standard C++ and should not suffer from this problem (with sufficiently modern compilers). Note that if you are using an older compiler, such as TCLite, you should read check out some compatability issues.

If you don't have a compiler, I strongly suggest that you get one. A simple compiler is sufficient for our use, but make sure that you do get one in order to get the most from these tutorials. The page linked above, compilers, lists compilers by operating system.

C++ is a different breed of programming language. A C++ program begins with a function, a collection of commands that do "something". The function that begins a C++ program is called main; this function is always called when the program first executes. From main, we can also call other functions whether they be written by us or by others. To access a standard function that comes with the compiler, you include a header with the ‪#‎include‬ directive. What this does is effectively take everything in the header and paste it into your program. Let's look at a working program:



Code:
#include <iostream>

using namespace std;

int main()
{
cout<<"HEY, you, I'm alive! Oh, and Hello World!\n";
cin.get();
}

Let's look at the elements of the program. The #include is a "preprocessor" directive that tells the compiler to put code from the header called iostream into our program before actually creating the executable. By including header files, you an gain access to many different functions. For example, the cout function requires iostream. Following the include is the statement, "using namespace std;". This line tells the compiler to use a group of functions that are part of the standard library (std). By including this line at the top of a file, you allow the program to use functions such as cout. The semicolon is part of the syntax of C and C++. It tells the compiler that you're at the end of a command. You will see later that the semicolon is used to end most commands in C++.

The next imporant line is int main(). This line tells the compiler that there is a function named main, and that the function returns an integer, hence int. The "curly braces" ({ and }) signal the beginning and end of functions and other code blocks. If you have programmed in Pascal, you will know them as BEGIN and END. Even if you haven't programmed in Pascal, this is a good way to think about their meaning.

The next line of the program may seem strange. If you have programmed in another language, you might expect that print would be the function used to display text. In C++, however, the cout object is used to display text. It uses the << symbols, known as "insertion operators", to indicate what to output. cout<< results in a function call with the ensuing text as an argument to the function. The quotes tell the compiler that you want to output the literal string as-is. The '\n' sequence is actually treated as a single character that stands for a newline (we'll talk about this later in more detail). It moves the cursor on your screen to the next line. Again, notice the semicolon: it is added onto the end of all, such as function calls, in C++.

The next command is cin.get(). This is another function call: it reads in input and expects the user to hit the return key. Many compiler environments will open a new console window, run the program, and then close the window. This command keeps that window from closing because the program is not done yet because it waits for you to hit enter. Including that line gives you time to see the program run.

Upon reaching the end of main, the closing brace, our program will return the value of 0 (and integer, hence why we told main to return an int) to the operating system. This return value is important as it can be used to tell the OS whether our program succeeded or not. A return value of 0 means success and is returned automatically (but only for main, other functions require you to manually return a value), but if we wanted to return something else, such as 1, we would have to do it with a return statement:

Code:
#include <iostream>

using namespace std;

int main()
{
cout<<"HEY, you, I'm alive! Oh, and Hello World!\n";
cin.get();

return 1;
}

The final brace closes off the function. You should try compiling this program and running it. You can cut and paste the code into a file, save it as a .cpp (or whatever extension your compiler requires) file. If you are using a command-line compiler, such as Borland C++ 5.5, you should read the compiler instructions for information on how to compile. Otherwise compiling and running should be as simple as clicking a button with your mouse.

You might start playing around with the cout function and get used to writing C++.

Comments are critical for all but the most trivial programs and this tutorial will often use them to explain sections of code. When you tell the compiler a section of text is a comment, it will ignore it when running the code, allowing you to use any text you want to describe the real code. To create a comment use either //, which tells the compiler that the rest of the line is a comment, or /* and then */ to block off everything between as a comment. Certain compiler environments will change the color of a commented area, but some will not. Be certain not to accidentally comment out code (that is, to tell the compiler part of your code is a comment) you need for the program. When you are learning to program, it is useful to be able to comment out sections of code in order to see how the output is affected.

So far you should be able to write a simple program to display information typed in by you, the programmer and to describe your program with comments. That's great, but what about interacting with your user? Fortunately, it is also possible for your program to accept input. The function you use is known as cin, and is followed by the insertion operator >>.

Of course, before you try to receive input, you must have a place to store that input. In programming, input and data are stored in variables. There are several different types of variables; when you tell the compiler you are declaring a variable, you must include the data type along with the name of the variable. Several basic types include char, int, and float.

A variable of type char stores a single character, variables of type int store integers (numbers without decimal places), and variables of type float store numbers with decimal places. Each of these variable types - char, int, and float - is each a keyword that you use when you declare a variable.

Sometimes it can be confusing to have multiple variable types when it seems like some variable types are redundant. Using the right variable size can be important for making your code readable and for efficiency--some variables require more memory than others. For now, suffice it to say that the different variable types will almost all be used!

To declare a variable you use the syntax type <name>. It is permissible to declare multiple variables of the same type on the same line; each one should be separated by a comma. The declaration of a variable or set of variables should be followed by a semicolon (Note that this is the same procedure used when you call a function). If you attempt to use an undefined variable, your program will not run, and you will receive an error message informing you that you have made a mistake.

Here are some variable declaration examples:

Code:
int x;
int a, b, c, d;
char letter;
float the_float;

While you can have multiple variables of the same type, you cannot have multiple variables with the same name. Moreover, you cannot have variables and functions with the same name.

Here is a sample program demonstrating the use a a variable:

Code:
#include <iostream>

using namespace std;

int main()
{
int thisisanumber;

cout<<"Please enter a number: ";
cin>> thisisanumber;
cin.ignore();
cout<<"You entered: "<< thisisanumber <<"\n";
cin.get();
}

Let's break apart this program and examine it line by line. The keyword int declares thisisanumber to be an integer. The function cin>> reads a value into thisisanumber; the user must press enter before the number is read by the program. cin.ignore() is another function that reads and discards a character. Remember that when you type intput into a program, it takes the enter key too. We don't need this, so we throw it away. Keep in mind that the variable was declared an integer; if the user attempts to type in a decimal number, it will be truncated (that is, the decimal component of the number will be ignored). Try typing in a sequence of characters or a decimal number when you run the example program; the response will vary from input to input, but in no case is it particularly pretty. Notice that when printing out a variable quotation marks are not used. Were there quotation marks, the output would be "You Entered: thisisanumber." The lack of quotation marks informs the compiler that there is a variable, and therefore that the program should check the value of the variable in order to replace the variable name with the variable when executing the output function. Do not be confused by the inclusion of two separate insertion operators on one line. Including multiple insertion operators on one line is perfectly acceptable and all of the output will go to the same place. In fact, you must separate string literals (strings enclosed in quotation marks) and variables by giving each its own insertion operators (<<). Trying to put two variables together with only one << will give you an error message, do not try it. Do not forget to end functions and declarations with a semicolon. If you forget the semicolon, the compiler will give you an error message when you attempt to compile the program.

Of course, no matter what type you use, variables are uninteresting without the ability to modify them. Several operators used with variables include the following: *, -, +, /, =, ==, >, <. The * multiplies, the - subtracts, and the + adds. It is of course important to realize that to modify the value of a variable inside the program it is rather important to use the equal sign. In some languages, the equal sign compares the value of the left and right values, but in C++ == is used for that task. The equal sign is still extremely useful. It sets the left input to the equal sign, which must be one, and only one, variable equal to the value on the right side of the equal sign. The operators that perform mathematical functions should be used on the right side of an equal sign in order to assign the result to a variable on the left side.

Here are a few examples:

Code:
a = 4 * 6; // (Note use of comments and of semicolon) a is 24
a = a + 5; // a equals the original value of a with five added to it
a == 5 // Does NOT assign five to a. Rather, it checks to see if a equals 5.

The other form of equal, ==, is not a way to assign a value to a variable. Rather, it checks to see if the variables are equal. It is useful in other areas of C++; for example, you will often use == in such constructions as conditional statements and loops. You can probably guess how < and > function. They are greater than and less than operators.

For example:

Code: [Select]
a < 5 // Checks to see if a is less than five
a > 5 // Checks to see if a is greater than five
a == 5 // Checks to see if a equals five, for good measure

Lesson 2 - IF

The ability to control the flow of your program, letting it make decisions on what code to execute, is valuable to the programmer. The if statement allows you to control if a program enters a section of code or not based on whether a given condition is true or false. One of the important functions of the if statement is that it allows the program to select an action based upon the user's input. For example, by using an if statement to check a user entered password, your program can decide whether a user is allowed access to the program. Without a conditional statement such as the if statement, programs would run almost the exact same way every time. If statements allow the flow of the program to be changed, and so they allow algorithms and more interesting code.

Before discussing the actual structure of the if statement, let us examine the meaning of TRUE and FALSE in computer terminology. A true statement is one that evaluates to a nonzero number. A false statement evaluates to zero. When you perform comparison with the relational operators, the operator will return 1 if the comparison is true, or 0 if the comparison is false. For example, the check 0 == 2 evaluates to 0. The check 2 == 2 evaluates to a 1. If this confuses you, try to use a cout statement to output the result of those various comparisons (for example cout<< ( 2 == 1 )

When programming, the aim of the program will often require the checking of one value stored by a variable against another value to determine whether one is larger, smaller, or equal to the other.

There are a number of operators that allow these checks.

Here are the relational operators, as they are known, along with examples:

Code:
> greater than 5 > 4 is TRUE
< less than 4 < 5 is TRUE
>= greater than or equal 4 >= 4 is TRUE
<= less than or equal 3 <= 4 is TRUE
== equal to 5 == 5 is TRUE
!= not equal to 5 != 4 is TRUE

It is highly probable that you have seen these before, probably with slightly different symbols. They should not present any hindrance to understanding. Now that you understand TRUE and FALSE in computer terminology as well as the comparison operators, let us look at the actual structure of if statements.

The structure of an if statement is as follows:

Code:
if ( TRUE )
Execute the next statement

To have more than one statement execute after an if statement that evaluates to true, use braces, like we did with the body of a function. Anything inside braces is called a compound statement, or a block.

For example:

Code:
if ( TRUE ) {
Execute all statements inside the braces
}

There is also the else statement. The code after it (whether a single line or code between brackets) is executed if the if statement is FALSE.

It can look like this:

Code:
if ( TRUE ) {
// Execute these statements if TRUE
}
else {
// Execute these statements if FALSE
}

One use for else is if there are two conditional statements that may both evaluate to true, yet you wish only one of the two to have the code block following it to be executed. You can use an else if after the if statement; that way, if the first statement is true, the else if will be ignored, but if the if statement is false, it will then check the condition for the else if statement. If the if statement was true the else statement will not be checked. It is possible to use numerous else if statements.

Let's look at a simple program for you to try out on your own.

Code:
#include <iostream>

using namespace std;

int main() // Most important part of the program!
{
int age; // Need a variable...

cout<<"Please input your age: "; // Asks for age
cin>> age; // The input is put in age
cin.ignore(); // Throw away enter
if ( age < 100 ) { // If the age is less than 100
cout<<"You are pretty young!\n"; // Just to show you it works...
}
else if ( age == 100 ) { // I use else just to show an example
cout<<"You are old\n"; // Just to show you it works...
}
else {
cout<<"You are really old\n"; // Executed if no other statement is
}
cin.get();
}

Boolean operators allow you to create more complex conditional statements. For example, if you wish to check if a variable is both greater than five and less than ten, you could use the boolean AND to ensure both var > 5 and var < 10 are true. In the following discussion of boolean operators, I will capitalize the boolean operators in order to distinguish them from normal english. The actual C++ operators of equivalent function will be described further into the tutorial - the C++ symbols are not: OR, AND, NOT, although they are of equivalent function.

When using if statements, you will often wish to check multiple different conditions. You must understand the Boolean operators OR, NOT, and AND. The boolean operators function in a similar way to the comparison operators: each returns 0 if evaluates to FALSE or 1 if it evaluates to TRUE.

NOT: The NOT operator accepts one input. If that input is TRUE, it returns FALSE, and if that input is FALSE, it returns TRUE. For example, NOT (1) evalutes to 0, and NOT (0) evalutes to 1. NOT (any number but zero) evaluates to 0. In C and C++ NOT is written as !. NOT is evaluated prior to both AND and OR.

AND: This is another important command. AND returns TRUE if both inputs are TRUE (if 'this' AND 'that' are true). (1) AND (0) would evaluate to zero because one of the inputs is false (both must be TRUE for it to evaluate to TRUE). (1) AND (1) evaluates to 1. (any number but 0) AND (0) evaluates to 0. The AND operator is written && in C++. Do not be confused by thinking it checks equality between numbers: it does not. Keep in mind that the AND operator is evaluated before the OR operator.

OR: Very useful is the OR statement! If either (or both) of the two values it checks are TRUE then it returns TRUE. For example, (1) OR (0) evaluates to 1. (0) OR (0) evaluates to 0. The OR is written as || in C++. Those are the pipe characters. On your keyboard, they may look like a stretched colon. On my computer the pipe shares its key with \. Keep in mind that OR will be evaluated after AND.

It is possible to combine several boolean operators in a single statement; often you will find doing so to be of great value when creating complex expressions for if statements. What is !(1 && 0)? Of course, it would be TRUE. It is true is because 1 && 0 evaluates to 0 and !0 evaluates to TRUE (ie, 1).

Try some of these - they're not too hard.

Code:
A. !( 1 || 0 ) ANSWER: 0
B. !( 1 || 1 && 0 ) ANSWER: 0 (AND is evaluated before OR)
C. !( ( 1 || 0 ) && 0 ) ANSWER: 1 (Parenthesis are useful)

No comments:

Post a Comment

Related Posts Plugin for WordPress, Blogger...